FloodLine Series Pro

Portable, reusable water-filled flood protection for homes, garages, shopfronts and smaller commercial openings.

Yellow FloodLine Series Pro barrier protecting a garage entrance

Practical Flood Protection Without Permanent Fixtures

FloodLine Series Pro is a portable inflatable flood barrier designed for fast deployment where floodwater may enter through doorways, garages, shopfronts, driveways and other short openings. The barrier is lightweight when empty, then filled with water on site so the weight of the contained water helps hold it in position.

Once the flood risk has passed, the barrier can be drained, cleaned, dried and stored for reuse. This provides a practical alternative to repeatedly preparing and disposing of traditional sandbags.

How It Works

The empty barrier is laid across the intended protection line and filled with water. As the tube fills, it develops the weight and shape required for deployment against shallow surface flooding and localised runoff. Correct placement, surface preparation and matching the barrier to the expected flood conditions are important to performance.

Construction

The Series Pro uses a 0.6 mm PVC construction. The yellow barrier is designed to remain compact for storage and handling when empty, while becoming substantially heavier and more stable once filled.

FloodLine Series Pro portable inflatable flood barrier

Series Pro Sizes

Explore three supplier-listed tube profiles, approximately 102 mm, 152 mm and 305 mm high, with eight length and profile combinations in the size guide. Contact Special Solutions Flood Protection to confirm the right size, current availability and lead time for your site.

8 size options · measurements in millimetres

Where Series Pro Is Best Suited

  • Residential doorways and garage entrances
  • Shopfronts and roller doors
  • Driveways and short accessways
  • Small commercial and light-industrial openings
  • Areas where a portable system is preferred over permanent posts or channels

Ground & Surface Guidance

Series Pro performs best on firm, relatively level surfaces such as concrete, asphalt, pavers or compacted ground. Sharp objects, loose debris and anything that could puncture the barrier should be removed before deployment.

Deployment Overview

  1. Assess the flood path. Identify where water is expected to approach and select a barrier length that extends beyond the opening where practical.
  2. Prepare the surface. Remove sharp objects and debris and check the ground is suitable for the barrier.
  3. Position the barrier. Lay the empty tube along the required protection line.
  4. Fill with water. Fill the barrier in accordance with the supplied instructions while checking its position and ground contact.
  5. Monitor conditions. Flood conditions can change, so the barrier and surrounding area should be monitored where it is safe to do so.
  6. Drain and store. Once the flood risk has passed, drain, rinse, dry and store the barrier out of direct sunlight ready for future use.

Performance & Limitations

Series Pro is intended for managing shallow surface water and localised runoff where site conditions are suitable. The listed tube heights do not establish a tested protection depth or leakage rate. Ask us to confirm the recommended operating limits for your chosen profile; a 305 mm-high tube must not be assumed to protect against 305 mm of floodwater.

It is not the right system for every flood risk. Deeper water, stronger flow, longer protection runs, steep or highly uneven ground, or larger commercial and infrastructure sites may require a heavier system such as FloodLine XL, a modular barrier or an aluminium flood barrier.

Choosing the Right Size

It is generally preferable to allow enough length for the barrier to extend beyond the vulnerable opening so water is not simply redirected around the ends. Before recommending a Series Pro size, we look at the opening width, expected flood direction, previous flood depth, surface condition and what is located immediately either side of the opening.

Supply & Support in New Zealand

Available throughout New Zealand. We can work through your measurements, photographs and known flood history to help determine whether Series Pro is suitable or whether another flood-protection system would be more appropriate.

Local site assistance is available within the wider Manawatū–Whanganui region, with other locations considered depending on the project.

Next step

Talk through your site

Send us your location, opening measurements, photographs and details of any previous flooding. We can discuss whether Series Pro is suitable or whether another flood-protection system may be a better fit.